NEC ELECTRA ELITE IPK II - SMDR Output Options

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 3 - 339
Description
Use Program 35-02 : SMDR Output Options to set the SMDR (Station Message
Detail Recording) output options for each of the eight SMDR ports. Refer to the
following chart for a description of each option, its range and default setting.
Program 35 : SMDR Account Code Setup
35-02 : SMDR Output Options
Level:
IN
Input Data
SMDR Port Number 1~8
Item
No.
Item Input Data Default
01
Toll Restricted Call
SMDR can include or exclude calls blocked by
Toll Restriction.
0 = Not Displayed
1 = Displayed
1
02
PBX Calls
When the system is behind a PBX, SMDR can
include all calls or just calls dialed using the
PBX trunk access code.
0 = Not Displayed
1 = Displayed
1
03
Trunk Number or Name
Select whether the system should display the
trunk name (0) or the number (1) on SMDR
reports.
 If this option is set to “1”, Program
35-02-14 must be set to “0”.
0=Name
1 = Number
1
04
Summary (Daily)
Set this option to (1) to have the SMDR report
provide a daily summary (at midnight every
night).
0 = Not Displayed
1 = Displayed
1
05
Summary (Weekly)
Set this option to (1) to have the SMDR report
provide a weekly summary (every Saturday at
midnight).
0 = Not Displayed
1 = Displayed
1
06
Summary (Monthly)
Set this option to (1) to have the SMDR report
provide a monthly summary (at midnight on the
last day of the month).
0 = Not Displayed
1 = Displayed
1