NEC ELECTRA ELITE IPK II - Trunk Control

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 543
Description
(This program is available only via telephone programming and not through PC
Programming).
Use Program 90-06 : Trunk Control is used for the trunk maintenance. Busy Out lets
you block a
ETU from placing outgoing calls (just like placing the ETU switch down).
Once busied out, none of the ports on the
ETU can be used for new calls. Existing
calls, however, are not torn down.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-06 : Trunk Control
Level:
SA
Input Data
Menu Number
0 = Set Busy Out
1 = Reset/Release Busy Out (idle)
Item
No.
Item Input Data
01
Trunk Control
Trunk Port Number:
001~200