NEC ELECTRA ELITE IPK II - Service Code Setup (for Hotel)

Document Revision 1 Electra Elite IPK II
2 - 62 Program 11 : System Numbering
Description
Use Program 11-14 : Service Code Setup (for Hotel) to customize the Service
Codes which are used with the Hotel/Motel feature. You can customize additional
Service Codes in Programs 11-10 through 11-13, 11-15 and 11-16. The Service Codes
can only be used at telephones registered as hotel terminals in Program 42-02.
The following chart shows:
J The number of each code (01~18).
J The function of the Service Code.
J The type of telephones that can use the Service Code.
J The default entry.
 If you change a Service Code, be sure to record your entry in the “New” column.
Program 11 : System Numbering
11-14 : Service Code Setup (for Hotel)
Level:
IN
Input Data
Item
No.
Item Terminals Default
01
Set DND for Own Extension
MLT, SLT 627
02
Cancel DND for Own Extension
MLT, SLT 628
03
Set DND for Other Extension
MLT, SLT 629
04
Cancel DND for Other Extension
MLT, SLT 630
05
Set Wake Up Call for Own Extension
MLT, SLT 631
06
Cancel Wake Up Call for Own Extension
MLT, SLT 632
07
Set Wake Up Call for Other Extension
MLT, SLT 633
08
Cancel Wake Up Call for Other Extension
MLT, SLT 634
09
Set Room to Room Call Restriction
MLT, SLT 635
10
Cancel Room to Room Call Restriction (Hotel)
MLT, SLT 636
11
Change Toll Restriction Class for Other Extension
MLT, SLT 637
12
Check-In
MLT, SLT 638