NEC ELECTRA ELITE IPK II - Automatic Trunk-To-Trunk Transfer Target Setup

Document Revision 1 Electra Elite IPK II
2 - 260 Program 24 : Hold/Transfer Setup
Description
Use Program 24-04 : Automatic Trunk-to-Trunk Transfer Target Setup to assign
the Speed Dialing number bin which should be used as the destination of the
Automatic Trunk-to-Trunk Transfer.
Conditions
None
Feature Cross Reference
J Call Forwarding, Off-Premise
Program 24 : Hold/Transfer Setup
24-04 : Automatic Trunk-to-Trunk Transfer Target Setup
Level:
IN
Input Data
Trunk Port Number 001~200
Item
No.
Day/
Night
Mode
Speed Dial
Area
Number
Default Description
Related
Program
01 1~8 0~1999 1999
The destination telephone number of the
Trunk-to-Trunk Transfer uses the number
registered into the Speed Dial. Use this
program to setup the Speed Dial Bin
Number.
11-10-08
13-04
24-05