Document Revision 1 Electra Elite IPK II
2 - 566 Program 90 : Maintenance Program
Description
(This program is available only via telephone programming and not through PC
Programming).
Use Program 90-35 : Firmware Update Time Setting to define the data for the
firmware update feature. This data is available to set for the Web/PC Programming
FW update feature. A compact flash card must be inserted in the CPUII for this
feature.
The following firmware is available to update with this feature:
J
main.bin
J
Dspdbu.bin
J
dsp.bin
J
intradbu.bin
Program 90 : Maintenance Program
90-36 : Firmware Update Time Setting
Level:
IN
Item
No.
Item Input Data Default Description
01
Firmware Update
Schedule Time
Year: 0~99 0 This Program sets the time to
update the firmware using a
compact flash card.
Time registration will fail if a
time is registered that has
expired.
Month: 0~12 0
Day: 00~31 0
Hour: 00~23 0
Minute: 00~59 0
02
Update mode
0 = Non Active
1 = Activated
0 (Non
Active)
This Program activates the
Firmware Update feature. If
this setting is “1” (Activated),
new firmware on the compact
flash card will update according
to the setting at 90-36-01.
To Next Page
Loading...
