Electra Elite IPK II Programming Manual 2 - 281
Program
26
Description
Use Program 26-01 : Automatic Route Selection Service to define the
system options for Automatic Route Selection (ARS).
Program 26 : ARS Service
26-01 : Automatic Route Selection Service
Level:
IN
Input Data
Item
No.
Item Input Data Default
Related
Programming
01
ARS Service
Enable or disable ARS.
0 = Disable (Off)
1 = Enable (On)
0 26-02
26-03
26-04
02
Network Outgoing Inter-Digit ARS Timer
With Networking, this timer replaces 20-03-04
when determining if all network protocol digits
have been received. If ARS is enabled at Site
B, this timer can be programmed for 5 (500
msec) at Site A. If ARS is disabled and Site B is
using F-Route for outbound dialing, this timer
should be programmed for 30 (3 seconds) at
Site A.
0~64800 (msec) 30 20-03-04
03
ARS Misdialed Number Handling
If a user dials a number not programmed in
ARS, this option determines if the system
should route over trunk group 1 or play error
tone.
0 = Route to Trunk
Group 1
1=Play Warning
Tone to Dialer
0 21-02
04
--- Not Used ---
05
--- Not Used ---
06
Class of Service Match Access
0 = Disable (Off)
1 = Enable (On)
0 26-02
07
F-Route Access COS Reference
0 = F-Route
1 = ARS
0 26-02
44-05
To Next Page
Loading...
