Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 233
Description
Use Program 22-07 : DIL Assignment to assign the destination extension or
Department Calling Group for each DIL Incoming trunk. A DIL rings an extension
directly, without any other Access Map or Ring Group programming. If an extension
has a line key, the DIL rings the line key. If the extension does not have a line key, the
DIL rings CAP keys. Use Program 22-02 to designate a trunk as a DIL). You can
make eight DIL assignments, one for each Night Service mode.
Conditions
H
Program 22-02 must be set to ‘4’ for the trunk.
Feature Cross Reference
J
Direct Inward Line (DIL)
Program 22 : Incoming Call Setup
22-07 : DIL Assignment
Level:
IN
Input Data
Trunk Port Number 001~200
Item
No.
Day/Night
Mode
Number of Transferring
Destination
Default
01 1~8 Extension Number (maximum 8
digits)
Pilot Number
No Setting
To Next Page
Loading...
