NEC ELECTRA ELITE IPK II - Master Subscriber Mailbox Options

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 429
Description
Use 47-06: Master Subscriber Mailbox Options to set up a Master Mailbox assigned as
a Subscriber Mailbox in
47-03-03: Master Mailbox Type.
Program 47 : In-Mail
47-06 : Master Subscriber Mailbox Options
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Number of Messages
(Number of Messages)
Use this option to set the maximum number of
messages that can be left in the Subscriber
Mailbox. If a caller tries to leave a message once
this limit is reached, they hear, “That mailbox is
full.” IPK II In-Mail then hangs up.
0~99 messages
To conserve storage
space, enter 0 for all
unused mailboxes.
20
02
Message Playback
(Message Playback)
Use this option to set the Subscriber Mailbox
message playback order. When a subscriber listens
to their messages, IPK II In-Mail can play the oldest
messages first (first-in/first-out, or FIFO), or the
newest messages first (last-in/first-out, or LIFO).
0 (FIFO = first-in/first-
out, or oldest
messages first).
1 (LIFO = last-in/first-
out, or newest
messages first).
0 (FIFO)
03
Auto Erase/Save of Messages
(Auto Erase/Save)
Use this option to determine what happens when a
Subscriber Mailbox user completely listens to a
new message and then exits their mailbox without
either saving (SA) or erasing (E) the message.
Depending on the setting of this option, IPK II
In-Mail will either automatically save or erase the
message. If the mailbox user hangs up before
listening to the entire new message, IPK II In-Mail
retains the message as a new message.
0 (Erase)
After the subscriber
listens to the entire
new message and
hangs up, IPK II
In-Mail erases the
message.
1 (Save)
After the subscriber
listens to the entire
new message and
hangs up, IPK II
In-Mail saves the
message.
1 (Save)