NEC ELECTRA ELITE IPK II - Copy Program by Port Number

Document Revision 1 Electra Elite IPK II
2 - 578 Program 92 : Copy Program
Description
(This program is available only via telephone programming and not through PC
Programming).
Use Program 92-03 : Copy Program by Port Number to delete all extension
numbers. However, the extension number of the first port is not deleted.
Conditions
None
Feature Cross Reference
None
Program 92 : Copy Program
92-03 : Copy Program by Port Number
Level:
IN
Item
No.
Item Input Data
01
Source Number
Enter the port number from which the
data will be copied.
02
Destination Number (From)
Enter the first port number to which the
information is to be copied.
03
Destination Number (To)
Enter the last port number to which the
information is to be copied. If the
information is only to be copied to one
port, enter the information entered in
the Destination Number (From) entry.