Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 423
Description
Use 47-03: IPK II In-Mail Master Mailbox Options to set up the 16 Master Mailboxes
(01~16). A Master Mailbox is used for Department Group overflow and can be a
Subscriber, Call Routing, or Announcement Mailbox.
Program 47 : In-Mail
47-03 : IPK II In-Mail Master Mailbox Options
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Master Mailbox Active
(Mailbox Active)
Use this option to enable or disable the Master
Mailbox. A Master Mailbox is not accessible when it is
disabled.
0 = No (Disabled)
1 = Yes (Enabled)
0 (No - Disabled)
02
Master Mailbox Number
(Mailbox Number)
The Master Mailbox Number is the same as the
Department Group master (pilot) number. Use this
option to select the Department Group master (pilot)
number associated with the Master Mailbox you are
programming.
Digits (8 maximum,
using 0~9).
No Setting
(entered by
pressing HOLD)
No Setting
03
Master Mailbox Type
(Mailbox Type)
Use this option to set the Master Mailbox type. There
are four types of IPK II In-Mail mailboxes: Call Routing
(1), Announcement (2), Subscriber (3), and Directory
(4).
H
If the Master Mailbox is a Call Routing Mailbox (1),
go to 47-04 : Master Call Routing Mailbox Options
to set up the Master Mailbox options.
H
If the Master Mailbox is an Announcement Mailbox
(2), go to 47-05 : Master Announcement Mailbox
Options to set up the Master Mailbox options.
H
If the Master Mailbox is a Subscriber Mailbox (3),
go to 47-06 : Master Subscriber Mailbox Options
to set up the Master Mailbox options.
H
If the Master Mailbox is a Directory Mailbox (4), go
to 47-14 : Master Directory Mailbox Options to set
up the Master Mailbox options.
0 (Undefined)
1 (Call Routing)
2 (Announcement)
3 (Subscriber)
4 (Directory)
3 (Subscriber)
To Next Page
Loading...
