NEC ELECTRA ELITE IPK II - Call Forward Split Settings

Document Revision 1 Electra Elite IPK II
2 - 262 Program 24 : Hold/Transfer Setup
Description
Use Program 24-09 : Call Forward Split Settings to assign Call Forwarding Type
and the destination numbers for each extension/virtual extension. The destination
can be up to 24 digits long, using 0~9,
, , # and P (pause). Be sure to include the trunk
access code (e.g., 9) in the number if the destination is off-premise.
Program 24 : Hold/Transfer Setup
24-09 : Call Forward Split Settings
Level:
IN
Input Data
Extension Number Maximum 8 digits
Item No. Input Data Default
01
Call Forwarding Type:
0 = Call Forwarding Off
1 = Call Forwarding with both ring
2 = Call Forwarding when no answer
3 = Call Forwarding all calls
4 = Call Forwarding busy or no answer
5 Call Forwarding when busy
0
02
CO Call Forwarding Destination for Both Ring,
All Call, No Answer
1~9, 0, #,
, , P, R, @
(Up to 24 digits)
No Setting
03
Intercom Call Forwarding Destination for Both
ring, All Call, No Answer
1~9, 0, #,
, , P, R, @
(Up to 24 digits)
No Setting
04
CO Call Forwarding Busy Destination
1~9, 0, #,
, , P, R, @
(Up to 24 digits)
No Setting
05
Intercom Call Forwarding Busy Destination
1~9, 0, #,
, , P, R, @
(Up to 24 digits)
No Setting