NEC ELECTRA ELITE IPK II - Programmable One-Touch Keys

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 135
Description
Use Program 15-14 : Programmable One-Touch Keys to define the One-Touch
key data for each multiline terminal.
For each Electra Elite IPK II Wireless telephone to use the Transfer When Out of
Range feature, enter the destination number (up to 24 digits) and name (up to 12
characters) into One-Touch bin 10. Make sure to add any required trunk access
codes for outside numbers. If this bin information is changed either through 15-14-01
or through user programming, the destination for the transferred calls is also
changed.
Default
H No entries for any extension.
Conditions
None
Feature Cross Reference
J One-Touch Keys
Program 15 : Extension, Basic Setup
15-14 : Programmable One-Touch Keys
Level:
IN
Extension Number Maximum 8 digits
Key Number 01~10
Item
No.
Dial Data Name Default
01 1~0,
, , #, Pause, Hook-
flash,
@ (Code for Answer-Wait)
Up to 24 digits
Up to 24 Digits No Setting
02 Name Up to 12 Digits No Setting