NEC ELECTRA ELITE IPK II - Program 12: Night Mode Setup; Night Mode Function Setup

Electra Elite IPK II Programming Manual 2 - 69
Program
12
Description
Use Program 12-01 : Night Mode Function Setup to set up the Night Mode
options. Refer to the following chart for a description of each option, its range
and default setting.
Conditions
None
Feature Cross Reference
J Night Service
Program 12 : Night Mode Setup
12-01 : Night Mode Function Setup
Level:
IN
Input Data
Item
No.
Item
Input
Data
Default Description
Related
Program
01
Manual Night
Mode Switching
0 = Off
1 = On
1
Allows/prevents users
from activating Night
Service by dialing a
service code.
11-10-01
02
Automatic Night
Mode Switching
0 = Off
1 = On
0
According to a preset
schedule, enable or
disable Automatic Night
Service for the system.
12-02
12-03
12-04
03
--- Not Used ---
 Even if the operation mode is changed manually, the operation mode changes according to the
schedule set up.