NEC ELECTRA ELITE IPK II - External Paging Zone Group

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 313
Description
Use Program 31-04 : External Paging Zone Group to assign each External Paging
zone to an External Paging group. Users call the External Paging group when
broadcasting announcements to the external zone. When programming, the zones on
the PGD(2)-U10 adapter are numbers 1~8. On the Electra Elite IPK II system, the
CPUII’s zone is number 9.
To simplify programming and troubleshooting, always make the External Paging Zone
Group the same number as the External Paging zone (i.e., 1 = 1, 2 = 2, etc.).
Conditions
None
Feature Cross Reference
J Paging, External
Program 31 : Paging Setup
31-04 : External Paging Zone Group
Level:
IN
Input Data
External Speaker Number 1~9
Item
No.
Paging Group
Number
Default
01 0~8 (0 = No Setting) Speaker 1 [PGD(2)-U10] = 1 (Group 1)
Speaker 2 [PGD(2)-U10] = 2 (Group 2)
Speaker 3 [PGD(2)-U10] = 3 (Group 3)
Speaker 4 [PGD(2)-U10] = 4 (Group 4)
Speaker 5 [PGD(2)-U10] = 5 (Group 5)
Speaker 6 [PGD(2)-U10] = 6 (Group 6)
Speaker 7 [PGD(2)-U10] = 7 (Group 7)
Speaker 8 [PGD(2)-U10] = 8 (Group 8)
Speaker 9 (CPUII) = 1 (Group 1)