NEC ELECTRA ELITE IPK II - Dial Analysis Table for ARS;LCR

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 283
Description
Use Program 26-02 : Dial Analysis Table for ARS/LCR to set pre-transaction tables
for selecting Automatic Route Selection (ARS).
J Service Type 1 (Route to Trunk Group Number) - The number routes to a trunk
group.
J Service Type 2 (F-Route Selected) - The number is controlled by the F-Route table.
Program 26 : ARS Service
26-02 : Dial Analysis Table for ARS/LCR
Level:
IN
Input Data
Dial Analysis Table Number 1~200
Item
No.
Item Input Data Default
Related
Programming
01
Dial
Dial Digits (16 digits maximum)
1-9, 0,
, , #, or for wild character (Press line key 1)
No
Setting
02
ARS Service Type
0 = No Service (None)
1 = Route to Trunk Group
2 = Select F-Route Access
0
03
Additional Data / Service
Number
If Service Type 1 (in 26-02): Select Trunk Group
Number (0~100, 0= No Route)
If Service Type 2 (in 26-02):
F-Route Time Schedule Not Used = 0~500
(F-Route Table Number).
Refer to Program 44-05 : ARS/F-Route Table on
page 2-399.
F-Route Time Schedule Used = 0~500
(F-Route Selection Number).
Refer to Program 44-04 : ARS/F-Route Selection
for Time Schedule on page 2-398).
044-04
44-05
04
ARS Class of Service
0~16 0
05
Dial Treatment for ARS
0~15 0