Document Revision 1 Electra Elite IPK II
2 - 324 Program 33 : CTA and ACI Setup
Description
Use Program 33-02 : ACI Department Calling Group to assign ACI ports to
Department Groups. An ACI port can only be in one group.
Also use this program to set the ACI port’s priority. When a call comes into the ACI
Department Group, it connects to the ACI port in order of their priority. A higher priority
port (e.g., 1) receives calls before a lower priority port (e.g., 6). There are 96 ACI
ports and 16 ACI Department Groups available.
Default
Conditions
None
Feature Cross Reference
J
Analog Communications Interface (ACI)
Program 33 : CTA and ACI Setup
33-02 : ACI Department Calling Group
Level:
IN
Input Data
ACI Port Number 01~96
Item
No.
Group
Number
Priority
01 01~16 1~96
ACI Port Group Priority
01 1 1
02 1 2
:::
96 1 96
To Next Page
Loading...
