NEC ELECTRA ELITE IPK II - System Options for Multiline Telephones

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 151
Description
Use Program 20-02 : System Options for Multiline Telephones to set various
system options for multiline telephones.
Program 20 : System Option Setup
20-02 : System Options for Multiline Telephones
Level:
IN
Input Data
Item
No.
Item Input Data Default
Related
Programming
01
--- Not Used ---
02
Trunk Group Access Key
Operating Mode
Use this option to set the operating
mode of the extension’s trunk group
keys. The keys can be for incoming
access, outgoing access or both.
0 = Outgoing / Incoming
1 = Outgoing
2=Incoming
0
03
BLF Control (DSS Busy Mark)
Set the conditions under which a
Hotline, Reverse Voice Over or DSS
Console key indicates that an
extension is busy. Refer to the
Reverse Voice Over feature for more
information.
0 = Idle / Busy (ON/OFF)
1 = Busy / Idle (ON/OFF)
1
04
Retrieve the Line After Transfer
Enable (1) or disable (0) an
extension’s ability to answer a call
after it’s been transferred, but before
it’s answered.
0 = Not Holding (No Keep)
1 = Holding (Keep)
1
05
Headset Busy Mode
Set the conditions under which a
headset extension is busy to
incoming callers.
0=No
1=Yes
0
06
Preselection Time
When a multiline terminal user
preselects a line key, the system
remembers the preselection for this
interval.
0~64800 seconds
5