NEC ELECTRA ELITE IPK II - HUB(8) VLAN Setup

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 529
Description
(For Future Release)
Use
Program 85-02 : HUB(8) VLAN Setup to define the VLAN setup for each HUB(8)
ETU. The KSU can support up to 16, 802.1q VLANs (numbered 1 - 16). Program
Block 85-02 assigns supported VLAN IDs, with a range of 1 - 4095.
At default, 802.1q support is disabled. If Program Block 85-02-01 is set to ENABLE,
802.1q VLAN tagging is supported.
85-02-02 through 85-02-09 establish the default VLAN for ports 1 ~ 8 of the HUB(8).
Program 85 : HUB(8) LAN Setup
85-02 : HUB(8) VLAN Setup
Level:
IN
Input Data
Hub Slot 1~24
Item
No.
Item Input Data Default
01
VLAN Mode
0 = Disable
1 = Enable
0
02
Port 1 VLAN ID
1~4095 1
03
Port 2 VLAN ID
1~4095 1
04
Port 3 VLAN ID
1~4095 1
05
Port 4 VLAN ID
1~4095 1
06
Port 5 VLAN ID
1~4095 1
07
Port 6 VLAN ID
1~4095 1
08
Port 7 VLAN ID
1~4095 1
09
Port 8 VLAN ID
1~4095 1