NEC ELECTRA ELITE IPK II - Page 128

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 93
Conditions
None
Feature Cross Reference
None
14
Loop Start/Ground Start
0 = Loop Start (Loop)
1 = Ground Start
(Ground)
0
15
--- Not Used ---
16
Caller ID Type
0 = FSK
1 = DTMF
0
17
Sync. Ringing
Use this to specify whether or not CO/
PBX calls follow Synchronous Ringing.
 Synchronous Ringing does not
apply to incoming DID calls,
off-hook ringing calls, or CO/
PBX ring transfer calls.
0 = Disable
1 = Enable
1
Item
No.
Item Input Data Default
Related
Program