NEC ELECTRA ELITE IPK II - Page 144

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 109
12
Off-Hook Ringing
Use this option to set the keyset’s Off-
Hook signaling. Off-hook signaling
occurs when a keyset user receives a
second call while busy on a handset
call. To enable/disable Off-Hook
Signaling for an extension’s Class of
Service, use Program 20-13-06.
0 = Muted Off-Hook
Ringing
1 = No Off-Hook Ringing
2 = Not Used
3 = Beep in Speaker (SP)
4 = Beep in Handset (HS)
5 = SPHS Beep
5
13
Redial List Mode
Select whether the Redial List feature
should store internal and external
numbers (0), or only external numbers
(1).
0 = ICM/Trunk
(Extension/Trunk
Mode)
1 = Trunk Mode
1
14
--- Not Used ---
-
15
Storage of Caller-ID for answered call
0 = Disable (Off)
1 = Enable (On)
1
16
Handsfree Operation
Enable or disable an extensions ability
to use the speakerphone on
outside
calls. When disabled, users can hear
the conversation, but cannot respond
handsfree.
0 = Disable (Off)
1 = Enable (On)
1
17
--- Not Used ---
-
18
Power-Saving Mode
0 = Normal mode
1 = Power-Saving Mode
(Eco-Mode)
1
19
CTA Data Communication Mode
Select ‘0’ if the dip switch settings on
the CTA Adapter are set to PC
connection (1=on, 2~8=off) or select ‘1’
if the dip switches are set to printer
connection (1~2=on, 3~8=off).
0=CTI Mode
1 = Non Procedural Mode
(Non-SCS)
0 15-02-20
20
Baud Rate for CTA Port
Select the baud rate to be used by the
CTA Adapter.
0 = 4800
1 = 9600
2 = 19200
2 15-02-19
Item
No.
Item Input Data Default
Related
Program