NEC ELECTRA ELITE IPK II - Page 238

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 203
Conditions
None
Feature Cross Reference
J Central Office Calls, Placing
16
Supervise Dial Detection Timer
With the Outgoing Disable on
Incoming Line feature, if dial tone is
not detected after the extension
answers an incoming line, the system
determines the call is unable to
complete and releases the DTMF
receiver.
0~64800 (sec)
20 15-01-05
21-01-16
21-01-17
17
Restriction Digit in Outgoing
Disable on Incoming Line
With the Outgoing Disable on
Incoming Line feature, determine the
number of digits to be dialed before
the call should be disconnected.
Digits 0~9
4 15-01-05
21-01-15
21-01-16
18
Reset Dial After Failure of Trunk
Access
0 = Disable (Off)
1 = Enable (On)
0 99-01-01
19
Do Not Call 0 = No Service
(Off)
1 = Extended
Common Restriction
(On)
0 15-01-07
Input Data
Item
No.
Item Input Data Default
Related
Program