NEC ELECTRA ELITE IPK II - Page 609

Document Revision 1 Electra Elite IPK II
2 - 574 Program 92 : Copy Program
Copy Program is applicable only for the following programs.
Trunk Port Base
Trunk Group Base
Extension Base
Program
No.
Program Name Note
14-01
Trunk Basic Data Setup Copy all data except Trunk Name
(Item 01).
14-02
Analog Trunk Data Setup
14-04
Behind PBX Setup
14-08
Music on Hold Source for Trunks
14-09
Conversation Recording Destination for Trunk
21-03
Trunk Group Routing for Trunks
21-12
ISDN Calling Party Number Setup for Trunk
22-02
Incoming Service Type Setup
22-03
Trunk Ring Tone Setup
22-05
IRG Assignment for Normal Ring Trunk
22-08
Second IRG Setup for Unanswered DIL / IRG
31-05
Incoming Ring Tone Audible on External Speaker
Program
No.
Program Name Note
35-03
SMDR Port Assignment for Trunk Group
Program
No.
Program Name Note
15-01
Extension Basic Data Setup (include Virtual
Extension)
Copy all data except extension
name (item 01).
15-02
Multiline Telephone Basic Data Setup
15-03
Single Line Telephone Basic Data Setup
15-04
PHS Terminal Basic Data Setup Copy Item 11, 12, and 13.
15-06
Trunk Access Map for Extension
15-07
Programmable Function Key
15-08
Incoming Virtual Extension Ring Tone Setup