Nordson freedom - Zone Standby Setup (contd)

Setup
4-37
Part 1123087_02
 3/2014 Nordson Corporation
Table 4‐13 Zone Standby Default and Optional Settings
Button Description Default Setting Optional Settings
Off
Zone Standby
Switches Zone Standby Time On
or Off. To use this function, enter
a Zone Standby Time.
Off On
Zone Standby Time Specifies how long a hose or
applicator zone can be inactive
before it enters zone standby. To
enable this function, change
Zone Standby to On.
NOTE: Each hose/applicator
pair has its own timer. When a
hose/applicator pair is inactive
for the amount of time specified
for Zone Standby Time, the
hose/applicator pair enters zone
standby.
NOTE: When all hose/applicator
zones enter zone standby, the
system switches to automatic
standby.
60 (minutes) 0-1440 (minutes)