Nordson freedom - Fill System Status

Operation
5-10
Part 1123087_02
 3/2014 Nordson Corporation
Fill System Status
The Fill Status button provides status information for the fill system as shown
in Figure 5‐5.
Refer to Table 5‐4 for an explanation of all fill system state and status
indications.
Fill Status
Ready
Fill system
status
Figure 5‐5 Fill Status button indications
Table 5‐4 Fill Status Button State and Status Indications
Zone State
Button Color State Indication
Disabled
Fill Status
White Disabled The fill system is disabled.
Zone Status
Button Color Status Indication
Fill Status
Ready
Green Ready The fill system is enabled and ready.
Fill Status
Waiting for heat
Light green Waiting for
Ready
The fill system is enabled but the system has not reached
Ready/OK status.
Fill Status
Filling
Light green Waiting for
Ready
The fill system is transferring adhesive.