Fill
Settings
Master
Controls
Setup
4-28
Part 1123087_02
3/2014 Nordson Corporation
Entering Fill Settings
Follow this procedure to adjust how the fill system operates.
1.. From the Home screen, touch Master Controls > Settings > Fill.
2.. Touch Fill Flutter Delay, Overfill Delay, Audible Fill Alarm, or Alert to
Fault Delay Time and use the keypad to enter the desired values. Refer
to Table 4‐9 for an explanation of these parameters and their default and
optional settings.
3.. Touch Done.
Fill Level Graph
Alert to Fault Delay Time
Overfill Delay
Done
Fill Flutter Delay
Fill Settings
Manual Call for fillFill Calibration
Home
Audible Fill Alarm
60 sec.
Enabled
5 sec.
4 min.
Figure 4‐14 Fill Settings screen
To Next Page
Loading...
