Description
2-5
Part 1123087_02
3/2014 Nordson Corporation
Limitations of Use
Intended Use
The adhesive melter may be used only to melt and convey suitable materials
(e.g., thermoplastic hot melt adhesives).
Any other use is considered to be unintended. Nordson will not be liable for
personal injury or property damage resulting from unintended use.
Intended use includes the observance of Nordson safety instructions.
Nordson recommends obtaining detailed information on the materials to be
used.
Electromagnetic Compatibility (EMC)
In regard to electromagnetic compatibility (EMC), the melter is intended for
use in industrial applications.
When operated in residential or commercial areas, the melter can cause
interference in other electrical units (e.g., radios).
Examples of Unintended Use
The melter may not be used under the following conditions:
In defective condition
Without its protective panels and insulation
In a potentially explosive atmosphere
When the melter specifications are not complied with
The melter may not be used to process the following:
Polyurethane hot melt adhesive (PUR)
Explosive and flammable materials
Erosive and corrosive materials
Food products
To Next Page
Loading...
