Description
2-6
Part 1123087_02
3/2014 Nordson Corporation
Residual Risks
In the design of the unit, every measure was taken to protect personnel from
potential danger. However, some residual risks can not be avoided:
Risk of burns from hot material
Risk of burns when conducting maintenance and repair work for
which the melter must be heated up
Risk of burns when attaching and removing heated hoses
Risk of inhaling potentially hazardous material fumes
Risk of damage to cables/lines belonging to the customer if they were
installed such that they come into contact with hot or rotating parts
Risk of safety valve malfunction due to hardened or charred material
To Next Page
Loading...
