Nordson freedom - Ec Declaration of Conformity

Technical File Contact:
Dieter Ziesmer
Nordson Engineering GmbH
Lilienthalstrasse 6
21337 Lueneburg
GERMANY
Date: 20 March 2014
Gregory P. Merk, Senior Vice President
Adhesives Dispensing Systems
1105311A05
DOC074R6
Nordson Corporation  28601 Clemens Road Westlake, Ohio
EC Declaration of Conformity
for Adhesive and Sealant Application Equipment
conforming to European Council Directives
PRODUCTS:
AltaBlue Melters, Models 15, 30, 50, 100
AltaBlue TT Melters, Models A4, A10, A16
AltaPail Melters
Cobalt GR Series Bulk Material Unloaders
DuraBlueMelters
FoamMelt FM‐200 Melter
Freedom Hot Melt Adhesive System
Fulfill Retrofit Kit
Mesa Melters
MiniPUR Melters
ProBlue Melters, Models P4, P7, P10, P15, P30 and P50
ProBlue Fulfill, Models P4F, P7F, P10F
PURBlue Melters
Series 3000V Melters
SureFoam Foam Dispensing System
APPLICABLE DIRECTIVES:
Machinery Directive: 2006/42/EC
Electromagnetic Compatibility Directive: 2004/108/EC
STANDARDS USED TO VERIFY COMPLIANCE:
EN ISO 12100 EN 60204‐1 EN 61000-6-4
EN ISO 13732‐1 EN 61000‐6‐2
EN 55011
(Class A, Group 1 for industrial environments. Use in
other environments may pose potential difficulty ensuring
electromagnetic compatibility due to conducted as well as
radiated disturbances.)
PRINCIPLES:
This product has been manufactured according to good engineering practice.
The product specified conforms to the directives and standards described above.
Model Number_________________________
Serial Number______________________________________