Nordson freedom - Resetting the Passwords

Administration
System
Master
Controls
Troubleshooting
7-10
Part 1123087_02
 3/2014 Nordson Corporation
Resetting the Passwords
Follow this procedure to reset all password settings to their factory defaults.
NOTE: You must know the Medium (Level 2) password to perform a
password reset. If the neither the default Level 2 password (2000) or the
master password (1225) works, contact your Nordson Representative for
assistance.
1. From the Home screen, touch Master Controls > System >
Administration > Reset Password.
All passwords reset to their factory defaults. Refer to Setting Up
Password Protection in Section 4, Setup, to set up password protection.
2. Touch Done.
Lockout Communication
Recipes
Display/Save Diagnostics
Done
System Reset
Administration
Display System DataReset Password
Home
Engineering
Off
Figure 7‐8 Administration screen