Ready Delay
Settings
Master
Controls
Setup
4-30
Part 1123087_02
3/2014 Nordson Corporation
Entering a Ready Delay
Follow this procedure to specify how long the system waits to indicate
Ready/OK status after all zones have reached setpoint temperature. The
Ready Delay prevents damage that can be caused if the adhesive is only
partially melted.
1.. From the Home screen, touch Master Controls > Settings.
2.. Touch Ready Delay and use the keypad to enter the desired value.
Refer to Table 4‐10 for default and optional settings.
3.. Touch Done.
Done
Ready Delay
Cancel
Home
78 9
45 6
12 3
0
Min.
Figure 4‐15 Ready Delay screen
To Next Page
Loading...
