Nordson freedom - Fill System Troubleshooting Procedures; Displaying the Fill Level Graph

Fill
Settings
Master
Controls
Troubleshooting
7-28
Part 1123087_02
 3/2014 Nordson Corporation
Fill System Troubleshooting Procedures
Displaying the Fill Level Graph
Follow this procedure to verify that the level sensor and fill system are
operating correctly. The fill level graph shows the variation of the level sensor
readings over time.
1. From the Home screen, touch Master Controls > Settings > Fill > Fill
Level Graph.
2. Touch Done.
Fill Level Graph
Alert to Fault Delay Time
Overfill Delay
Done
Fill Flutter Delay
Fill Settings
Administration
Fill Calibration
Home
Language
Audible Fill Alarm
60 sec.
Enabled
5 sec.
4 min.
Fill Level Graph
Done
100
75
50
25
Figure 7‐13 Fill Level Graph screen