Display
System
Master
Controls
Setup
4-48
Part 1123087_02
3/2014 Nordson Corporation
Entering the Touchscreen Screen Saver Delay
The screen saver is an enlargement of the System Status button located on
the Home screen. To extend the life of the touchscreen, the screen saver
reduces brightness and contrast by 30%.
1.. From the Home screen, touch Master Controls > System > Display >
Screen Saver Delay. Refer to Table 4‐20 for default and optional
settings.
2.. Touch Done.
When the screen saver appears, touch anywhere on the screen to
display the Home screen.
Brightness/Contrast
Done
Home
Display
Screen Saver Delay
Calibrate Screen
Wipe Display
Figure 4‐25 Display screen
Table 4‐20 Screen Saver Delay Default and Optional Settings
Button Description Default Setting Optional Settings
Screen Saver Delay Specifies the amount of time of no
user interaction with the
touchscreen before the screen
saver appears
5 (minutes) 1-120 (minutes)
To Next Page
Loading...
