Contents of the cyclone exhaust
filter service kit:
Exhaust filter
Disabled
Refill
Master
Controls
Maintenance
6-8
Part 1123087_02
3/2014 Nordson Corporation
Replacing the Cyclone Exhaust Filter
You will need the following items:
Cyclone exhaust filter service kit
Refer to Section 9, Parts, for service kit part numbers.
See Figure 6‐5.
1. From the Home screen, touch Master Controls > Refill to disable the fill
system.
2. Remove the cyclone exhaust filter cover (1) by turning the fasteners on
the top and bottom of the filter cover one quarter‐turn counterclockwise.
3. Replace the old filter (2) with a new one.
WARNING! Risk of personal injury. Do not operate the system without a
properly installed cyclone exhaust filter and filter cover.
4. Reinstall the filter cover, enable the fill system, and restore the system to
normal operation.
1
2
Figure 6‐5 Replacing the cyclone exhaust filter
1. Cyclone exhaust filter cover 2. Filter
To Next Page
Loading...
