Scheduler
System
Master
Controls
Setup
4-54
Part 1123087_02
3/2014 Nordson Corporation
Setting Up the Scheduler
Use the Scheduler to set up the system to automatically switch the heaters
On or Off and to automatically enter and exit the standby mode at specified
times.
To schedule events
1.. From the Home screen, touch Master Controls > System > Scheduler.
2.. Verify that the Current System Settings are correct:
If the Current System Settings are correct, select the day for which
you want to schedule events and continue to the next step.
If the Current System Settings are not correct, touch Change
Date/Time and enter the correct value(s).
NOTE: The system does not automatically adjust for seasonal time
changes or leap years.
Change Date/Time
Current System Settings:
Cancel
Scheduler
Home
Sun Mon Tue Wed Thu Fri Sat
Tuesday 12/03/13 14:40
Done
Figure 4-27 Scheduler screen
To Next Page
Loading...
