Setup
4-55
Part 1123087_02
3/2014 Nordson Corporation
3.. See Figure 4‐28. Select Add Heat Event or Add Standby Event:
On the Add Heat Event screen, enter the times for the heater control
to automatically switch On and Off. Touch Done to save.
On the Add Standby Event screen, enter the times for the system to
automatically enter and exit the standby mode. Touch Done to save.
NOTE: Up to 12 events per day may be entered. Scheduled events
cannot cross over to the next day.
NOTE: The system does not verify the times entered.
NOTE: Touch
to remove an event. Touch to copy an event.
Events can only be copied forward.
4.. Touch
or to set heat and standby events for the remaining
days.
NOTE: Touch
to paste a copied event.
5.. When all events have been entered, touch Done. Continue to the next
procedure to switch On the Scheduler.
Scheduler: Monday
Done
Cancel
Home
Add Heat Event Add Standby Event
Heat
Standby
06:00 11:30
11:31 13:00
Heat 13:01 18:30
Done
Add Heat Event
Cancel
Home
78 9
45 6
12 3
0/:
Turn Heaters On:
Turn Heaters Off:
06:00
18:00
Done
Cancel
Home
78 9
45 6
12 3
0:
Enter Standby:
Exit Standby:
0:30
13:30
Add Standby Event
Figure 4-28 Using the Scheduler to add heat and/or standby events
To Next Page
Loading...
