Nordson freedom - Air Gauge; Applicator Solenoid Valve-to-Melter Cables

Parts
9-48
Part 1123087_02
 3/2014 Nordson Corporation
Air Gauge
Part Description Note
1030537 KIT, GAUGE, 1500 PSI —
Applicator Solenoid Valve‐to‐Melter Cables
See Figure 9‐28. Order this cable as needed to connect additional applicator
signal inputs to the melter. Refer to Connecting Applicator Signal Wiring in
Section 3, Installation.
Item Part Description Quantity Note
1 1100687 CABLE ASSY,SOL,M8,3-WIRE,5 METERS AR
1 1100958 CABLE ASSY,SOL,M8,3‐WIRE,10 METERS AR
2 1100688 CABLE ASSY,SOL,90 DEG,M8,3-WIRE,
5 METERS
AR
2 1100959 CABLE ASSY,SOL,90 DEG,M8,3‐WIRE,
10 METER
AR
NS 1121988 KIT,CABLE,EXTENSION,SOL,M8,0.3M LG AR A
NS 1121989 KIT,CABLE,EXTENSION,SOL,M8,90DEG,
0.3 M LG
AR A
NS 1121990 KIT,CABLE,SPLITTER,SOL,M8,1MTO2F,0.3M LG AR A
NOTE A: These extension and splitter cables can be used for additional routing configurations.
AR: As Required
NS: Not Shown
1
2
Figure 9‐28 Solenoid valve‐to‐melter cables