Repair
8-44
Part 1123087_02
3/2014 Nordson Corporation
Replacing a Hydraulics Assembly Component
Use this procedure to replace the entire hydraulics assembly or to replace
one of the hydraulics assembly components.
You will need the following items:
Pressure discharge valve, manifold, grid/hopper, or
reservoir service kit
4‐mm, 5‐mm, and 8‐mm hex keys
8‐mm wrench
Refer to Section 9, Parts, for service kit part numbers. See Figure 8‐29 for the
contents of these hydraulic assembly service kits.
2
3
1
4
Figure 8‐29 Contents of the hydraulic assembly service kits
1. Pressure discharge valve service kit
2. Manifold service kit
3. Grid/hopper service kit 4. Reservoir service kit
To Next Page
Loading...
