Nordson freedom - Heated Zone Status

Operation
5-12
Part 1123087_02
 3/2014 Nordson Corporation
Heated Zone Status
Each external heated zone button provides state and status information for
the zone, as shown in Figure 5‐6.
Refer to Table 5‐5 for an explanation of all heated zone state and status
indications.
Zone 1A
145 C
←
←
Heated zone
name
Actual zone temperature
Arrows present when a
hose/applicator pair is configured
to be controlled from a remote
location (refer to Connect
Inputs/Outputs (Optional) in
Section 3, Installation, and to
Setting Up Inputs/Outputs in
Section 4, Setup)
EcoBead status
(dashed line indicates
that EcoBead is
enabled; solid line
indicates that EcoBead
is not enabled
Figure 5‐6 Heated zone button indications