Description
2-12
Part 1123087_02
3/2014 Nordson Corporation
Optional Equipment
Optional equipment may be ordered to expand the functionality of the hot
melt system, including, but not limited to, the following:
Melter floor and bench stand kits that allow the melter to be
mounted on a stand
A pressure gauge that provides a manifold hydraulic pressure
reading. A hose port must available to use this gauge
Adhesive storage bin grate that can be installed in the top of the
storage bin to sift the adhesive and separate clumps that developed
during the adhesive packaging process
Quick‐disconnect harness kit that allows the quick disconnect of
transfer hose solenoid harnesses at the adhesive storage bin
Refer to Section 9, Parts, for a complete list of optional equipment.
To Next Page
Loading...
