Nordson freedom - Manual Standby;Auto Exit Standby Time Setup

Standby
Settings
Master
Controls
Manual Standby
Setup
4-38
Part 1123087_02
 3/2014 Nordson Corporation
Manual Standby/Auto Exit Standby Time Setup
1.. From the Home screen, touch Master Controls > Settings > Standby >
Manual Standby.
2.. Touch Auto Exit Standby Time and use the keypad to enter the desired
value. Refer to Table 4‐14 for an explanation of this parameter and the
default and optional settings.
3.. Touch Auto Exit Standby Time to toggle Auto Exit Standby Time to
enable.
4.. Touch Done.
Manual Standby
Done
Home
Auto Exit Standby Time
60 min.
Enabled
Auto Exit Standby Time
Figure 4‐18 Manual Standby screen
Table 4‐14 Manual Standby Default and Optional Settings
Button Description Default Setting Optional Settings
Enabled
Auto Exit Standby Time
Enables or disables Auto Exit
Standby Time. To use this
function, enter an Auto Exit
Standby Time.
Disabled Enabled
Auto Exit Standby Time Specifies the amount of time to
elapse after the system enters
manual standby before the
system automatically exits
manual standby. To enable this
function, change Auto Exit
Standby Time to Enabled.
0 (minutes) 0-180 (minutes)