Standby
Settings
Master
Controls
Setup
4-34
Part 1123087_02
3/2014 Nordson Corporation
Standby Temp Delta Setup
1.. From the Home screen, touch Master Controls > Settings > Standby.
2.. Touch Standby Temp Delta and use the keypad to enter the desired
value. Refer to Table 4‐12 for an explanation of this parameter and the
default and optional settings.
3.. Touch Done.
Standby Settings
Done
Home
Standby Temp Delta
50 C
Zone Standby
Manual Standby
Automatic Standby
Figure 4‐16 Standby Settings screen
Table 4‐12 Standby Temperature Delta Default and Optional Settings
Button Description Default Setting Optional Settings
Standby Temp Delta Specifies the number of degrees
from the setpoint temperature by
which the system reduces
heated zones when the system
enters the standby mode
50 C (100 F) 5-190 C
(10-350 F)
To Next Page
Loading...
