Nordson freedom - Verify the Contents of the Ship-With Kit

Melter ship‐with kit
Installation
3-4
Part 1123087_02
 3/2014 Nordson Corporation
Verify the Contents of the Ship‐With Kit
Remove the melter ship‐with kit from the shipping pallet and verify that it
contains the components shown in Figures 3‐2 and 3‐3.
2
4
6
7
8
9
P/N 1034145
P/N 277908
P/N 277909
10
P/N 232617
P/N 227568
P/N 227567
P/N 227569
P/N 972628
1
11
P/N 105419
P/N 1027144
P/N 939955
P/N 939683
12
(2H = 2)
(4H = 4)
3
5
Figure 3‐2 Ship‐with kit components (1 of 2)
1. Hose connector, with O‐ring, 9/16-18
2. Jumper, 1/N/PE, AC, 200-240 V
3. Jumper, 3/N/PE, AC 400-230 V
4. Jumper, 200-240 V, 1‐phase
5. Jumper, 3/PE ,AC, 200-240 V
6. Fuse,10.00, non‐time-delay, 250 V
7. Fuse, time-lag, 2 A
8. Fuse, 5.00, very-fast-acting, 250 V
9. Fuse, 6.30, fast-acting, 250 V
10. Terminal block connector,
7‐position, 1-7
11. Terminal block connector,
7‐position, 8-14
12. Male pneumatic adaptor