Disabled
Refill
Master
Controls
Troubleshooting
7-37
Part 1123087_02
3/2014 Nordson Corporation
Clearing Adhesive Bin Blockage
1. From the Home screen, touch Master Controls > Refill to disable the fill
system.
2. Disconnect the compressed air supply to the adhesive bin.
3. Disconnect the adhesive transfer hose and use a rod with a diameter less
than 19 mm (¾ in.) to break up the blockage.
4. Reconnect the hose and restore the system to normal operation.
Figure 7‐21 Using a rod to remove adhesive bin blockage
To Next Page
Loading...
