Description
2-1
Part 1123087_02
3/2014 Nordson Corporation
Section 2
Description
Introduction
This manual describes the installation and use of the Freedom hot melt
adhesive system. The Freedom system is a complete adhesive melting,
transfer, and dispensing system that includes the Freedom melter along with
Freedom hoses and applicators.
The Freedom hot melt adhesive system offers users:
Freedom from mounting limitations
Freedom from manual adhesive filling
Freedom from confusing controls and diagnostics
Freedom from excessive adhesive use
Freedom from downtime due to char and contamination
The important characteristics of the Freedom system are described in this
section.
Figure 2‐1 Freedom hot melt adhesive system
To Next Page
Loading...
