Maintenance
6-1
Part 1123087_02
3/2014 Nordson Corporation
Section 6
Maintenance
WARNING! Allow only personnel with appropriate training and experience to
operate or service the equipment. The use of untrained or inexperienced
personnel to operate or service the equipment can result in injury, including
death, to themselves and others, and damage to the equipment.
Performing routine maintenance can extend the life of the hot melt system
and decrease the downtime needed for repairs. This section provides a
schedule of recommended maintenance activities and common maintenance
procedures.
Preventive Maintenance Schedule
Table 6‐1 Preventive Maintenance Tasks and Frequencies
Task Frequency Reference
Replacing the adhesive filter
As needed
When changing the type or
grade of adhesive
Replacing the Adhesive Filter
Replacing the cyclone exhaust
filter
As needed Replacing the Cyclone Exhaust
Filter
Upgrading the firmware As needed Upgrading the Firmware
To Next Page
Loading...
