Nordson freedom - Automatic Standby;Auto Heaters Off Time Setup (contd)

Setup
4-40
Part 1123087_02
 3/2014 Nordson Corporation
Table 4‐15 Automatic Standby Default and Optional Settings
Button Description Default Setting Optional Settings
Enabled
Automatic Standby
Enables or disables Automatic
Standby. To use Automatic
Standby, enter an Auto Standby
Start Time.
Disabled Enabled
Auto Standby Start Time Specifies how long the system
waits after the Automatic
Standby input signal is removed
before the system enters
automatic standby. To use this
function, change Automatic
Standby to enabled.
0 (minutes) 0-1440 (minutes)
Auto Heaters Off Time Specifies the amount of time that
must elapse after the system
enters automatic standby before
the heaters automatically shut off
60 (minutes) 0-1440 (minutes)