Nordson freedom - Setting Up Password Protection (contd)

Setup
4-52
Part 1123087_02
 3/2014 Nordson Corporation
Setting Up Password Protection (contd)
Table 4‐22
Password Security Levels
Security Level
(See Note A)
Functions Enabled High Medium Low
Level 1 (high) Heated zone setpoints
Switch between 12/24 hour time format
Select date format (yy/mm/dd, mm/dd/yy,
dd/mm/yy)
Smart Melt On/Off
Global Setpoint
Global Temperature Change (increment/decrement)
Purge melter On/Off
Level 2 (medium) Smart Melt Temperature
Smart Melt Time
Overtemperature/Undertemperature limits
Reset Password
Fill settings (Fill Flutter Delay, Overfill Delay, Alert to
Fault Delay Time)
Audible Fill Alarm On/Off
Fill Level Graph
Manual Call for Fill,
Fill Calibration Empty (button only)
Standby settings (Auto Standby Start, Auto Heaters
Off Time, Zone Standby Time, Auto Exit Standby,
Standby Temp)
Level 3 (low) Create custom zone names
EcoBead Settings (operational mode, Adhesive
Savings, Bead Pattern)
Switch between °C and °F
Assign standard Inputs and Outputs
Set up Scheduler (add/modify/delete seven-day
clock events)
System Reset (Level 1 and Level 2)
Recipes (Load or Delete a Recipe, Do not use a
Recipe, Save Recipe)
Lockout Communications On/Off
Passwords (Create/Modify, Timeout, Set Security
Level)
Ready Delay duration
Enter a Service Reminder interval or clear a Custom
Service Alert message
Create Custom Service Alert message
NOTE A: Level 1 (high) security includes Level 2 (medium) and Level 3 (low) functions; Level 2 (medium) security
includes Level 3 (low) functions.
Continued...