Nordson freedom - Connect the Driver, Pattern Controller, or Timer Wiring (contd)

Installation
3-25
Part 1123087_02
 3/2014 Nordson Corporation
2
3
1
X4
Hose/applicator 1 in
Chassis
Chassis
Chassis
Chassis
Hose/applicator 1 in
Hose/applicator 2 in
Hose/applicator 2 in
Hose/applicator 3 in
Hose/applicator 3 in
Hose/applicator 4 in
Hose/applicator 4 in
Figure 3‐18 Connecting the driver, pattern controller, or timer wiring to terminal block X4 on the hose interface board
1. Terminal block X4 2. Strain relief for input/output wiring 3. Hose interface board