Table of Contents
vi
Part 1123087_02
3/2014 Nordson Corporation
Repair 8-1.....................................................
Purging the Melter 8‐2...........................................
Tilting Open the Hydraulics Assembly 8‐4..........................
Melter Repair Procedures 8‐6....................................
Replacing an RTD or Thermostat 8‐6...........................
Replacing the Level Sensor Cable 8‐10..........................
Replacing the Level Sensor Board 8‐14..........................
Replacing a Circuit Board 8‐17..................................
Replacing the Main Board Fuses 8‐20............................
Replacing the Pneumatic Control Assembly 8‐21..................
Replacing the Tilt Switch 8‐26...................................
Replacing the Touchscreen Assembly 8‐30.......................
Replacing a Cyclone Assembly Component 8‐33..................
Replacing the Pump 8‐38.......................................
Replacing a Hydraulics Assembly Component 8‐44................
Replacing the Internal SD Card 8‐49.............................
Fill System Repair Procedures 8‐52................................
Replacing the Transfer Pump or Transfer Pump O‐Rings 8‐52.......
Replacing the Vibrator 8‐54.....................................
Replacing the Fill System Pneumatic Control Assembly 8‐56........
Replacing the Adhesive Transfer Hose Cuff Assembly 8‐58.........