Oce ColorStream - Page 271

See section ...Cleaning location
‘Cleaning the Paper Input’ on page 283Paper input:
■
Paper width sensor
■
Paper web tensioner
■
Paper guide plates
■
Reject roller
■
Pressure rollers
■
Unclamp plate for autofeed
clamp
■
Paper brake
■
Pre-centering
‘Cleaning the Paper Output’ on page 286Paper output:
■
Pressure rollers
■
Tension roller
■
Paper movement sensor
■
Data integrity sensor
■
Paper web
■
Paper guide plates
■
Additional feed
Each week:
#
See section ...Cleaning location
‘Cleaning the Toner Suction System’ on page 301Toner bottle holder
‘Replace waste toner box’ on page 331Waste toner box
Additional Cleaning Operations
Every time the photoconductor belt and photoconductor blade are replaced:
#
See section ...Cleaning location
‘Removing Photoconductor Belt in Upper Print Unit
and Replacing Photoconductor Blade’ on page 352
‘Removing Photoconductor Belt in Lower Print Unit
and Replacing Photoconductor Blade. ’ on page 364
Photoconductor unit rollers and
profiles
Every time corotron wires are replaced:
Chapter 7 - Cleaning the Printing System 271
Cleaning Agents and Cleaning Intervals